The JMT-IW 165 ironworker is the powerhouse among JMT's dual cylinder machines. With a punching pressure of 182 tons it has the capacity to put a 2-1/4″ hole through 1″ thick mild steel, and it offers a whopping 330 tons of pressure for angle shearing (8″ x 8″ x 3/4″ capacity at 90 degrees). It has five work stations (two of which can run simultaneously). This 20 HP machine can punch, notch, shear bars and angle iron with the best of them. Optional equipment such as an NC table and a 24″ press brake attachment can also be added.
PUNCHING:
- 182 Tons Punching Pressure
- 2-¼” Dia. Hole in 1″ Thick Punching Capacity
- 20″ Throat Depth
- 3-1/2″ Stroke Length (Maximum)
- 31 Cycles per Minute (3/4″ Stroke)
- 44″ Working Height (up to Die)
FLAT BAR SHEARING:
- 3/4″ Flat Bar (Max. Thickness)
- 30″ Flat Bar (Max. Width)
- 5″ Angle Flange Trim (45° Max.)
- 39″ Working Height
ANGLE (SECTION) SHEARING:
- 330 Tons Tonnage
- 8″ x 8″ x 3/4″ at 90° Shearing
- 2.75″ x 2.75″ x 1/4″ at 45° Miter Shearing
- 53″ Working Height
NOTCHING:
- 5/8″ Material Thickness
- 2-1/4″ Rectangular Notcher (Width)
- 4-3/8″ Rectangular Notcher (Depth)
- 35-1/2″ Working Height
TECHNICAL DATA:
- 20 HP Motor Power
- 39.5 Gallon Oil Capacity
- 16,535 Lbs. Approximate Net Weight
- 128″ L x 52″ W x 90″ H Approximate Machine Dimensions
Production Package Standard Equipment:
2 simultaneous working stations, 5 work stations total, machine light for improved vision at work station, high-speed hydraulics, precision punching gauge table with stops, precision notching gauge table with stops, 10 sets of punches and dies up to 1½”, electric touch and cut 39” back gauge, gauge table at shearing station, quick-change punch coupler.
Optional Equipment:
- Punching up to 4″
- Punching up to 6.25″
- Press Brake Attachment 24″
- NC Table
Related Products
-
JMT 120 Ton Ironworker (IW 110)
A popular machine among our ironworkers, the JMT-IW 110 with its extra throat depth and 121-ton punching power is large enough to handle most big jobs around the typical shop, but affordable enough to have o ...
A popular machine among our ironworkers, the JMT-IW 110 with its extra throat depth and 121-ton punching power is large enough to handle most big jobs around the typical shop, but affordable enough to have on hand for everyday use. The dual cylinder design allows two stations (out of a total of five) to operate simultaneously.
-
JMT 90 Ton Ironworker (IW 80)
The 15 HP 5-station JMT-IW 80 is a nice, mid-range machine for those who need just a little more power and capacity than smaller ironworkers can offer. With an 90-ton punching capacity and 1-3/4″ round ...
The 15 HP 5-station JMT-IW 80 is a nice, mid-range machine for those who need just a little more power and capacity than smaller ironworkers can offer. With an 90-ton punching capacity and 1-3/4″ round and square bar shearing ability, the JMT-IW 80 will work wonders in your shop.
-
JMT 50 Ton Ironworker (IW 45)
With its small footprint, the JMT-IW 45 ironworker is the perfect fit for a small shop that works with lighter material. Still, with its 50-tons of punching power, the IW 45 can easily put a 1-1/16″ ho ...
With its small footprint, the JMT-IW 45 ironworker is the perfect fit for a small shop that works with lighter material. Still, with its 50-tons of punching power, the IW 45 can easily put a 1-1/16″ hole in half-inch mild steel. This mighty mitering machine may not have the capacity of its larger dual cylinder siblings, but it still has all the capabilities: punching, flat shearing, angle shearing, bar shearing and notching. It will serve you well in all your metalworking!
-
JMT 60 Ton Ironworker (IW 55)
Small and reliable, the 60-ton JMT-IW 55 ironworker is ideal for most light and medium jobs. This dual-cylinder machine can have operators at two stations working simultaneously, and comes standard from JMT ...
Small and reliable, the 60-ton JMT-IW 55 ironworker is ideal for most light and medium jobs. This dual-cylinder machine can have operators at two stations working simultaneously, and comes standard from JMT with the 20″ deeper throat (a 10″ throat model is available upon request). This is the ironworker you are looking for!
