The PL-C (compact) Series utilizes an all-in-one compact frame design. The bridge rails are integrated into the cutting table. This design uses less floor space, and includes an integrated partitioned downdraft system for efficient smoke and dust removal.
This design is best for small features and small holes, especially on material ¾” and thinner. This design is not for cutting thick plate with oxy-acetylene.
Standard dimensions of the cutting area are:
- -5’ x 10’
- -6’9” x 13’4”
- -6’9” x 20’
JMT PL-C Plasma Systems uses Hypertherm HyPerformance Precision Plasma, available in 130 Amp, 260 Amp, and 400 Amp power levels. Hypertherm is the highest quality and most reliable plasma available, is U.S. made, and is capable of highly accurate cutting on gauge metals up through two-inch carbon steel, and eve ...
JMT PL-C Plasma Systems uses Hypertherm HyPerformance Precision Plasma, available in 130 Amp, 260 Amp, and 400 Amp power levels ...
Dual precision rack & pinion guides for both the x and y axis, and a ball screw design for the z axis, which is torch height, The heavy duty machine frame is welded and stress relieved. A synchronized, dual side, backlash free drive system with highly accurate planetary gears provides high quality and accurate cutting. Manual and CNC beveling, and oxy-fuel cutting heads are also available.
CNC Control Unit
The SINUMERIK 840 D-ISL is a fully PC-integrated numerical control system for up to 20 axes, networking with the SINAMICS S120 drive system.
The control has open hardware and software functions and is ideally suited for users requiring distributed automation solutions with regard to PLC I/O and drives and/or prefer a fully PC-integrated control system.
JMT has proprietary plasma software on the Sinumerik controller. The operator can easily load the operation parameters to the power supply. Simple shapes can also be loaded from the included and expandable library.
The cutting operations are shown on-screen during cutting, and the controller can also be connected to the computer or a LAN via Ethernet connection.
If desired, you can control the plasma filter unit by pressing any button on the control panel or automatically when the cutting starts.
The machine scans the plate, finds the Zero position and calculates the Plate Angle automatically. No plate alignment is necessary!