Servo Press Brakes

Servo Press Brakes

Servo Hydraulic Press Brakes

Our servo driven hydraulic press brake will increase your production cost efficiency and therefore increase your competitive forces. Servo press brakes are often referred to as electric hydraulic press brakes due to their technologically advanced electrically powered servo motors. Our servo press brakes are super fast during the pressing cycle resulting in more cycle times per minute allowing you to keep costs low and be as efficient as possible with more bent parts every day. JMT offers an industry leading series of servo hydraulic press brakes.

Currently we offer these highly sophisticated eco-friendly press brakes in 4 popular sizes and tonnages: The AD-Servo 25100 8 foot 4 inches bending length, and 110 tons; The AD-Servo 30100 10 foot bending length and 110 tons; The AD-Servo 30135 10 foot bending length and 150 tons; And finally the AD-Servo 30175 10 foot bending length and 192 tons. Other bending lengths and tonnages available upon request.

The features & benefits list of our servo brakes is considerable

Silent bending with noise level reduced to 63 dbA from 76 dbA. Energy savings of up to 66% at stand-by; 44% during the press cycle and 60% in 1 hour with 15 press cycles. Small hydraulic oil tank for clean environment and cost reduction. New technology reduces hydraulic tank from 60 gallons to two 10 gallon tanks. Speed, accuracy and synchronization. Beam speeds to 472″ per minute (higher with optional safety laser guarding). 5.6 times better synchronization in high speed mode (Y1/Y2)

These servo drive machines come with 5 axis cnc controllers, Y1-Y2, X & R and motorized wave crowning. The heart of these servo brakes is the Delem DA-66T Controller. Highlights include but are not limited to: touch screen, direct navigation, 2D programming, 3D programming, auto bend sequence and collision detection. This control is designed with highly effective algorithms that optimize the machine cycle and minimize machine setup. The DA-66T also comes with an RS-232 port, 2 USB 2.0 ports, and is “teach in” on all axes.

  • These machines come with 5 axis CNC controllers, (Y1-Y2-X & R) with motorized wave crowning. The heart of these machines is ...

The benefits is evident

The AD-Servo line of press brakes whole concept is to minimize power consumption. Since these press brakes are completely servo driven the power consumption of these advanced press brakes is something on the order of less than 40% power consumption of a conventional press brake of equal size. Due to the "on time hydraulics" concept these brakes utilize in that the hydraulics turn on and off and run only while needed, many benefits arise from this operational method. Less hydraulic oil is required for these brakes minimizing maintenance costs, the oil stays at a much cooler temperature throughout the use cycle, extending the oil’s life and helping to maintain piece part integrity and angular accuracy. Because of the servo drives, the movement of the brakes is considerably faster in all directions when compared to conventional brakes, the result of that is increased productivity while maintaining + - .0004 accuracy and repeat-ability in all directions. If your parts are really long, ask us about tandem, trio, or even quad configurations of our servo machines as we do them all the time.

Equipped the way they should be.

Of course as with all JMT press brakes the AD-Servo offers the "trio advantage" of large ram height, deep throat and large stroke. Other standard features include American/European box punch clamps, 25.6 inch X axis travel with third gauge step capable of gauging 39 inch parts. AC Servo driven back gauge on linear guide, 2 front sliding support arms, safety interlocks on all doors and a rear work light. Of course World Class components abound on these servo driven hydraulic press brakes, every major component is made by some company you have heard of.

The available options make customizing easy.

This options list could be almost endless, we will just list the major ones here, if you don’t see something you want, just ask us we probably have it. Since safety is of the utmost priority, at the top of our list of options is the AKAS-LC (anybody have a “trade mark symbol put it here) World Class laser safety system, considered to be the best you can get for a press brake. Light curtain Sick C 4000 for combination machines. Additional axis up to 14. Extended travel back gauge to 39 inches with safety light curtain. Sheet follower with motorized height adjustment. Updated cnc controllers from Delem (DA69T) or Cybelec (10S,12S,15S, 3D with PC1200)Both are 3D touch graphical controls. Quick release clamping, Hydraulic clamping, Wila or Wilson mechanical or hydraulic clamping, tooling options from the "who’s who" of press brake tooling. Bottom tool positioning systems, thickness measurement systems, offline software for V-Bend or Profile-W.

Support? What support?, who talks about it and who doesn’t?

Combine those outstanding machine capabilities listed above and then consider this; with our industry renowned service (we average 2 ½ service technicians to every salesperson), our well-staffed emergency service line, and a parts department that would blow your mind. If your initial investment includes tooling up your press brake, JMT has you covered there as well. We are factory trained and certified Wila and Wilson tooling experts with the tools on the shelf.

WHEN IT COMES TO PRESS BRAKES, JMT-USA IS THE ANSWER, AND OUR MOTTO IS ALWAYS; "STRONG ON SERVICE."