Mar 04, 2015 Leave a comment

Don’t Get Flattened by the Wrong Plate Roll Six Questions that Can Help You Select the Right Equipment [Adapted from an article JMT was commissioned to write for the October 2013 issue of The Fabricator magazine.] Plate rolling is not like working a press brake, where there is a single bend and one direction of…

Read More

Mar 03, 2015 Leave a comment

[Adapted from an article JMT wrote for the October 2013 issue of The Fabricator magazine.] Most metal fabricators will require a plate roll to work with many materials, which will affect the machine’s rolls in different ways. To accommodate this variety, most manufacturers’ rolls are machined with optimal crowning (see Figure 1). Typically, optimal crowning…

Read More

Nov 21, 2013 1 Comment

Day 4 of FABTECH 2013 has just wrapped up, and the final day of the annual show was just as eventful for JMT as the previous three. While the main attraction was yet again the two JMT fiber lasers that were being demonstrated, customers gathered around JMT personnel to learn about the ironworkers, angle rolls,…

Read More

Nov 20, 2013 Leave a comment

Day 3 of FABTECH 2013 is underway, and interest in JMT products hasn’t lessened up. “Very good,” was the answer Shane Reynolds, a Regional Sales Manager at JMT, responded when asked today how the show was going. “People come up and are very impressed with the booth and the layout,” he said. Known for its press…

Read More

Nov 19, 2013 , Leave a comment

The 2nd day of FABTECH 2013 was an eventful one for JMT. National Sales Manager Ken Bartelli remarked, “On top of the normal flow of people, we were very pleased at the number of return Fabtech attendees on Tuesday who had already visited our booth on Monday. This allowed us to delve deeper into the…

Read More

Nov 18, 2013 Leave a comment

FABTECH 2013 has arrived! The staff of JMT set up our booth over the last few days and we are now welcoming customers in to take a look at our fabrication equipment. This is the first day of the nearly week-long annual event, which is held this year in Chicago at McCormick Place. JMT’s booth (#…

Read More

Oct 21, 2013 Leave a comment

Fabtech 2013 is almost here! Join us November 18-21, 2013 in our booth S1793,  to view our Plate Rolls and sign up for a demonstration! With Fabtech 2013 quickly approaching, JMT would like to announce that we will be hosting a booth this year with many of our plate rolls on display and available for…

Read More

Aug 23, 2013 Leave a comment

After a successful JMT distributor training day yesterday, the public portion of the 2013 JMT Fiber Laser Open House is now underway at the JMT headquarters. Today customers are viewing demonstrations on our new model NF-1530 fiber laser along with seeing two press brakes and a plate roll in operation. The entire JMT staff is out on…

Read More